There is more to consider than simply installing a safety laser scanner on an automated guided vehicle (AGV) or autonomous mobile robot (AMR).
Not only do you need to program the scanner with protective fields, but those fields also need to be validated against the hazards identified in your risk assessment.
Your AGV/AMR's speed, the distance it travels after a protective field is violated, the scanner's location, and the surrounding environment all play a role in determining whether your protective field provides the required coverage.
Understanding these factors before putting your AGV/AMR into service can help identify potential problems when integrating the scanner into your equipment.
What Is a Protective Field?
Safety laser scanners use laser technology to monitor a defined area around your equipment.
If something enters a programmed protective field, the scanner's safety-rated output signals the detection to your safety system.
What happens next depends on the rest of your safety system, which may include a safety controller, the vehicle's drivetrain, brakes, and other components.
Some safety laser scanners also allow you to configure warning fields. These can be used to notify an operator or initiate a controlled reduction in vehicle speed.
Important: Warning fields should not replace your safety-rated protective field.
There are many factors to consider when determining the appropriate protective field size and how your system should respond.
6 Things to Check When Validating Your Protective Field
1. Know Your Stopping Distance
How far does your AGV/AMR travel once a protective field has been violated?
Several factors can affect stopping distance, including:
- Vehicle speed
- Sensor response time
- Safety controller response time
- Vehicle drivetrain
- Braking performance
- Vehicle load
- Surrounding environmental conditions
For example, a fully loaded AGV/AMR may take longer to stop than an unloaded vehicle.
Make sure to test your equipment under the conditions outlined in your risk assessment. Applicable safety standards and the complete system's response characteristics should be used when determining the required protective distance.
2. Review Scanner Placement
Safety laser scanners monitor a defined scanning plane.
Where you mount your scanner, including its height and orientation, determines which areas it can monitor.
For example, you may have an AGV that carries a pallet wider than the AGV itself.
You need to identify which areas remain accessible when evaluating the vehicle and its load.
Check the following when reviewing scanner placement:
- Scanner height: Is the scanner positioned at the appropriate height for the hazards being monitored?
- Blind spots: Are there areas blocked by parts of the AGV/AMR?
- Load dimensions: Does the equipment carry materials that extend beyond the vehicle?
- Scanner location: Is the scanner recessed into the vehicle, potentially limiting its field of view?
- Detection coverage: What objects and areas can the scanner detect, and what areas are outside its coverage?
Additional protective devices or safeguards may be necessary depending on the application.
3. Evaluate Forward and Reverse Movement
Your AGV/AMR may travel forward, reverse, or turn in different directions.
Make sure the protective fields address the hazards associated with each direction of travel.
Some applications require vehicles to move in both forward and reverse directions. Each movement should be evaluated as part of the system's risk assessment.
Questions to consider:
- Does your AGV/AMR travel in reverse?
- Does it rotate or turn while moving?
- Are different protective fields used for forward and reverse travel?
- Does your AGV/AMR travel at different speeds?
- If protective fields are switched, what happens if the wrong field is selected?
- How does the safety system respond if field switching fails?
These questions should be addressed during system design and verified when validating the complete safety system.
4. Account for Changing Speeds
Your AGV/AMR may travel at different speeds depending on its application.
For example, it may move faster through an open warehouse and slow down when approaching a docking area.
You need to make sure your protective fields are appropriate for the vehicle's changing speed and stopping distance.
If you are using multiple selectable protective fields, determine:
- Which protective field sizes are required
- When each field should be active
- How field switching is controlled
- Whether the selected field provides adequate coverage at the vehicle's current speed
The protective field configuration and switching process should be validated for the vehicle's intended operating conditions.
5. Evaluate the Surrounding Environment
Several environmental factors can affect your safety laser scanner's performance.
These may include:
- Dust and debris
- Contamination on the scanner's optical surface
- Vibration
- Ambient lighting
- Temperature
- Moisture and other environmental conditions
Be sure to review your safety laser scanner's specifications before putting it into service.
Test the scanner under conditions representative of those in your facility.
If your operating environment exceeds the scanner's rated capabilities, you may need to evaluate additional protective measures or alternative equipment.
6. Validate Your Complete Safety System
Your safety laser scanner is only one component of your overall safety system.
The scanner may detect an object entering its protective field, but what happens next?
Questions to address during validation:
- Does your safety controller respond correctly?
- Does your AGV/AMR stop as required?
- Does the braking system perform as expected?
- Does the safety system respond appropriately to faults?
- Can the equipment safely recover after a protective-field violation?
- Are all required safety functions operating correctly?
These are important questions when validating your safety system.
Make sure to document the tests performed, the results, and the personnel responsible for testing.
Validation should be conducted by qualified personnel in accordance with the applicable safety requirements and risk assessment.
Do I Need More Than One Safety Laser Scanner?
Depending on your AGV/AMR's design and operating requirements, you may need more than one safety laser scanner to provide adequate protective coverage.
For example, you may have an AGV/AMR that transports products. The front of the robot may have sufficient protective coverage, but what about the sides, rear, or areas obstructed by the load?
Engineers need to evaluate all areas where the equipment could present a hazard to personnel.
Depending on the application, additional safety laser scanners or other protective devices may be required.
The goal is to make sure the complete safety system addresses the hazards identified in the risk assessment.
How Hokuyo Can Help With Your AGV/AMR Application
Hokuyo offers a variety of safety laser scanners for AGVs, AMRs, and stationary industrial machinery.
There are several factors to consider when selecting the appropriate safety laser scanner for your application.
Important specifications to review include:
- Protective field size: Does the scanner provide the required protective coverage?
- Number of protective fields: How many field configurations does your application require?
- Outputs and interfaces: Can the scanner integrate with your safety control system?
- Environmental rating: Is the scanner appropriate for your operating conditions?
- Mounting requirements: Can the scanner be installed where it provides the necessary coverage?
By comparing available models and reviewing their technical specifications, you can better understand which safety laser scanner may be appropriate for your equipment.
Explore Hokuyo Safety Laser Scanners to review available models and their capabilities.
Remember: Validate Your Safety System Before Putting It Into Service
Your safety laser scanner needs to be tested as part of your complete application.
Programming a protective field is only the first step.
You also need to verify that the finished equipment meets the applicable safety requirements and that its protective functions perform as intended.
Keep these considerations in mind when designing your application, and validate your equipment before putting it into service.
Need Help Finding the Right Safety Laser Scanner?
Hokuyo-USA can help you evaluate available scanner models based on your equipment, application, and integration requirements.
Contact Hokuyo-USA to discuss your project and find the right safety laser scanner for your application.
